PRODUCTS SPEC.

2015/6/3

 

ADD Floor Inc Engineered Flooring Products Specification
Hardwood flooring is crafted of natural woods, which are uniquely characterized by variations in grain and color. These variations are not flaws, but part of the beauty of real wood floors. Real wood will also experience change in color over a period of time. The degree of change depends on the species and the amount of UV exposure. We recommend our engineered hardwood flooring specifically for those wishing not to install at below-grade level.
Thickness 1/2″,9/16
Wear Layer Premium 2mm Top Layer , Nine UV Coating with Aluminum Oxide Finished.
Construction 9 Multi-Layer Plywood, Low Formaldehyde and VOC Glue
Widths Strip Sizes – 3″, 5″, 7″,8" and Wide Plank
Lengths Normal runs contain random lengths of 1’to 4’ and 2’to 6’
Edges T&G and end matched with option – square or eased edge
Species White Oak, Birch, Hard Maple, Hickory and Acaica
Grades Clear, Natural and Mill Run
Warranty 25 Year Structural Residential Warranty
Installation Nail/Staple/Glue/Floating
Application Above Grade/On Grade
Environment The Lacey Act guards against illegal logging. CARB is a state of California regulation that restricts the use of Formaldehyde in all wood products.
There are inspections that must be performed before installation including careful examination of the flooring for style, grade, color, finish, dimension and quality, job-­‐site and environmental conditions. The installation of our flooring and these instructions are intended for experienced hardwood installers. All others, including the owner/installers, assume all risks of every kind respecting examination of flooring, job-­‐site and environmental conditions as well as the installation. If you require additional or more detailed information on the installation of hardwood flooring, please contact the National Wood Flooring Association (NWFA) at 1-­‐800-­‐422-­‐4556 or visit www.nwfa.org
 
Recommended Sub-­‐Flooring Installations
Concrete Slabs: Glue-­‐down or float
Acoustic Concrete: Glue-­‐down or float
Plywood: Glue-­‐down, float or staple
(Do not staple over particle board or similar product)
Resilient Tile or Sheet Vinyl: Glue-­‐down, float or staple
Cork: Glue-­‐down or float
Ceramic, Terrazzo, Slate Or Marble:
Glue-­‐down or float
 
GENERAL INFORMATION
Hardwood flooring is a natural product and variations in color, grain, pattern and texture occur normally and are not considered defects and are not warranted. ADD Floors proudly manufactures all engineered hardwood Floors within tolerances accepted by the industry as standard, which allows for up to 5% defective product (natural or manufacturing related) based on the original hardwood flooring purchase. Be sure to order at least 5% additional flooring material beyond actual square footage requirements to allow for cutting and grading of material. If your installation will be on a diagonal, order 10% -­‐ 15% extra material.
 
*WARRANTY COVERAGE ON ADD FLOORS PRODUCTS WILL BE LOST DUE TO FAILURE TO STRICTLY FOLLOW ALL INSTALLATION AND CARE INSTRUCTIONS AND RECOMMENDATIONS OR THE USE OF IMPROPER MATERIALS OR TOOLS. READ ALL OF THESE INSTRUCTIONS CAREFULLY.